Moro USA Jetter Box and Skid Mounted Gas Gearbox Hydraulic Drive Pkgs

Choose from jetter units units equipped gas engine pkg, hydraulic drive pkg, or right-angle drive pkg, 5 GPM/3000 PSI plunger pump, ajustable unloader valve, Pulsator valve, inlet filter, wash gun/lance, jetter nozzle, set of wash nozzle tips, 200' x 3/8" hose, 12V electric rewind hose reel, 24”x24”x48" box, and 3.2 gallon remote fuel tank.

—
These jetter units is built for ease of use and durability and grease pumpers find it to be more than sufficient to provide flushing and jetting needs on routine grease trap servicing.

Jetter Box - Gas Engine Driven, 5 GPM, 3000 PSI

• 5 GPM/3000 PSI plunger pump
• Honda electric-start gas engine
• Adjustable unloader valve
• Pulsator valve
• Inlet filter
• Wash gun/lance
• Jetter nozzle
• Set of wash nozzle tips
• 200' x 3/8" hose
• 12V electric rewind hose reel
• 24”x24”x48" box
• 3.2 Gallon remote fuel tank
• Made in the USA

Jetter Gas Engine Driven, 10 GPM, 3000 PSI Toolbox Mount Pkg

• Gas engine pkg, hydraulic drive pkg, or right-angle drive pkg
• 5 GPM/3000 PSI plunger pump
• Honda electric-start gas engine
• Adjustable unloader valve
• Pulsator valve
• Inlet filter
• Wash gun/lance
• Jetter nozzle
• Set of wash nozzle tips
• 200' x 3/8" hose
• 12V electric rewind hose reel
• 24”x24”x48" box
• 3.2 Gallon remote fuel tank
• Made in the USA

Jetter Box - Hydraulic Driven, 10 GPM, 3000 PSI

• 24” x 24” x 48” Wide Smooth Aluminum Toolbox with no fail door open system
• Adjustable speed air-powered rewind hose reel with built in pressure regulator
• Factory attached under box support
• Adjustable mounting kit that allows the box to move away or along the frame to use the existing frame holes
• Hydraulic models have a mount that moves in and out for drive shaft / motor alignment
• Shut off valve to reel (for flush nozzle changing)
• Tool rack / nozzle storage
• 10 GPM/3000 PSI General or Cat pump with unloader and conveniently located pulsator valve
• 200’ 3/8” x 4000 PSI Jetter Hose
• Standard flushing nozzle
• Wash down gun with quick disconnect 0°, 15°, 25°, and 40° nozzles
• LED light with switch
• Fast reservoir fill / drain connection with built in strainer / filter and shut off valve
• All factory pre-set and ready to use (no adjustments needed)

Jetter Gearbox Driven with CAT Pump, 5 GPM, 3000 PSI Toolbox Mount Pkg

• 24” x 24” x 36” Wide Smooth Aluminum Toolbox with no fail door open system
• 5 GPM/3000 PSI CAT Triplex pump with unloader and conveniently located pulsator valve
• 200’ 3/8” x 4000 PSI Jetter Hose
• Factory attached under box support
• Adjustable mounting kit that allows the box to move away or along the frame to use the existing frame holes
• Gearbox models have a separate mount that moves in and out for drive shaft / motor alignment
• Shut off valve to reel (for flush nozzle changing)
• Tool rack / nozzle storage
• Adjustable speed air-powered rewind hose reel with built in pressure regulator
• Standard flushing nozzle
• Wash down gun with quick disconnect 0°, 15°, 25°, and 40° nozzles
• LED light with switch
• Fast reservoir fill / drain connection with built in strainer / filter and shut off valve
• All factory pre-set and ready to use (no adjustments needed)

Jetter Gearbox Driven, 10 GPM, 3000 PSI, Toolbox Mount Pkg

• 24” x 24” x 48” Wide Smooth Aluminum Toolbox with no fail door open system
• Adjustable speed air-powered rewind hose reel with built in pressure regulator
• Factory attached under box support
• Adjustable mounting kit that allows the box to move away or along the frame to use the existing frame holes
• Gearbox models have a mount that moves in and out for drive shaft / motor alignment
• Shut off valve to reel (for flush nozzle changing)
• Tool rack / nozzle storage
• 10 GPM/3000 PSI General pump with unloader and conveniently located pulsator valve
• 200’ 3/8” x 4000 PSI Jetter Hose
• Standard flushing nozzle
• Wash down gun with quick disconnect 0°, 15°, 25°, and 40° nozzles
• LED light with switch
• Fast reservoir fill / drain connection with built in strainer / filter and shut off valve
• All factory pre-set and ready to use (no adjustments needed)

• Gas engine pkg, hydraulic drive pkg, or right-angle drive pkg
• 5 GPM/3000 PSI plunger pump
• Honda electric-start gas engine
• Adjustable unloader valve
• Pulsator valve
• Inlet filter
• Wash gun/lance
• Jetter nozzle
• Set of wash nozzle tips
• 200' x 3/8" hose
• 12V electric rewind hose reel
• 24”x24”x48" box
• 3.2 Gallon remote fuel tank